Carver Cascade 2 / 2 GE Manual Operating Instructions PDF
Carver Cascade 2 / 2 GE Manual Operating Instructions PDF
In the manual you will learn:
- Important cautions about the use of the system
- A detailed description of the system
- Preparing the system
- How to light the heater on gas
- Switching the heater off on gas
- The meaning of the indicator lights on the control panel
- How to adjust the thermostat
- How to switch the heater on mains
- Frost precautions
- User safety notes
- Troubleshooting the system
- How to install the system
Add to cart to download instantly.
How does the Carver Cascade 2 & 2 GE work?
The Cascade 2 (and 2 GE version) are models of integrated water heaters typically installed in touring caravans in the 80s and 90s.
They are essentially storage water heaters with an ample capacity of 9 litres which works out at around 2 gallons.
The unit is recognisable by it’s flue cowl being visible on one of the external sides of the caravan.
The operational parts that for gas are found inside an individual module that should only be removed by a qualified gas engineer.
To operate the system on gas, use the control panel inside the caravan which can be found mounted on the wall. You can identify the state of the heater using the indicator lights on the front of the panel.
If you have the Cascade 2 GE then your water heater also operates on 240 V mains electric. This is a real benefit because you can run both gas and electric at the same time in order to speed up the heating process.
We have a full copy of the operating instructions manual for the Carver Cascade 2 & GE models in our archive. Included with this is a copy of the step-by-step installation instructions – very handy if you plan to remove and reinstall.
Please note: We kindly request a small donation upon the download of any materials from our archive. Your donation helps us to cover the running costs, maintenance and the securing of additional documents to be added to the archive and is received with grateful thanks. You will be prompted to make the donation after clicking the link above.
What is the difference between the Cascade 2 and the Cascade 2 GE?
The Cascade 2 runs only on GAS.
Whereas the Cascade 2 GE runs on both GAS and 240V MAINS ELECTRIC.
Carver Cascade 2 / 2 GE Troubleshooting
There are a number of different problems that can arise with this model of water heater.
Depending upon which system you are running, you should follow the Heater Fault Tracing instructions for gas operation and or mains electric operation found inside the installation instructions (included with the download).
Carver was acquired by Truma in the 90s – if you require further technical support you might want to try contacting them directly.